 |
|
|
||
 |
|
|
||
 |
|
|||
|
|||||||||||
Amplifiers > 120i Integrated | 60C SE Integrated
 |
|
|
|
|
|
 |
|||||
 |
 |
 |
 |
||
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
|
 |
 |
 |
|||
| Features | |
 |
|
| High Current Solid State Integrated Amplifier • Custom made chassis painted with a durable textured enamel baked at 800 degrees • Anodized Black Aluminium Fascia with Matching Knobs • Highest Quality Low Noise, Low Drift Components used throughout • Hermetically Sealed Highest quality Silver plated Volume Control • Silver plated selector switches |
| Specifications | ||
Type : |
Integrated Amplifier |
|
Circuit : |
High Current Solid State |
|
| Power : | 120 Watts (4Ω) 70 Watts (8Ω) |
|
| THD : | 0.01 both channels driven into 8Ω | |
| Maximum output: | 24V RMS (Stereo) | |
| Frequency Response : | <1Hz to 60KHz | |
Gain : |
26dB |
|
Signal to Noise Ratio : |
>100dB, 75 Watts (A weighted) |
|
Resistors: |
High quality low noise, low drift |
|
| AC Power Requirements : | 240 volts AC / 50Hz at 25 watts | |
| Wire : | Amber™ | |
| Warma Up Time : | 10 minutes | |
| Break in Time : | 300 hours of playing time | |
| Volume : | Master dual volume control equally controlling input signal to line section preamplifier | |
| AC Power Requirements : | 240 volts AC / 50Hz at 25 watts | |
Dimensions: H x W x D |
73 x 440 x 229 (mm) |
|
| Weight: | ||
Finish: |
Anodized Black Aluminium Fascia with Matching Knobs + Durable Black Textured Enamel Chassis. |
|
Specifications subject to change without notice |
||
|
© 2006 AMBER Electronics |