 |
|
|
||
 |
|
|
||
 |
|
|||
|
|||||||||||
Amplifiers > 120i Integrated | 60C SE Integrated
 |
|
|
|
|
|
 |
|||||
 |
|||||
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
|
 |
 |
 |
|||
| Features | |
 |
|
| High Current Hybrid Integrated Amplifier • Custom made chassis painted with a durable textured enamel baked at 800 degrees • Anodized Black Aluminium Fascia with Matching Knobs • Highest Quality Low Noise, Low Drift Components used throughout • Hermetically Sealed Highest quality Silver plated Volume Control • Silver plated selector switches • 2 x Premium 6FQ7/6CG7 valves included (Preamp Section) |
| Specifications | ||
| Type : | Hybrid Integrated Amplifier | |
| Preamp Section | ||
| Circuit : | A Class Single Ended | |
| Gain line stage : | 20dB | |
| Input Impedance : | 100K | |
| Output Impedance : | 600Ω | |
| Noise and Hum : | -88dB below full output | |
| Frequency Response : | 10Hz to 20KHz (+/- 0.1dB) | |
| Valves : | 2 x 6FQ7/6CG7 | |
| Poweramp Section | ||
| Circuit : | High Current Solid State | |
| Power : | 75W (8Ω) 125W (4Ω) |
|
| Maximum output : | Stereo 24V RMS | |
| Frequency response : | < 1Hz to 60KHz (-3dB) | |
| THD & Noise : | 0.01 both channels driven into 8Ω | |
| Noise dB, A-weighed : | >100dB below 75W | |
| Gain : | 26 dB | |
| Warma Up Time : | 10 minutes | |
| Break in Time : | 300 hours of playing time | |
| Volume : | Master dual volume control equally controlling input signal to line section preamplifier | |
| AC Power Requirements : | 240 volts AC / 50Hz at 25 watts | |
Dimensions: (H x W x D) |
73 x 440 x 229 (mm) |
|
| Weight : | ||
| Finish : | Anodized Black Aluminium Fascia with Matching Knobs + Durable Black Textured Enamel Chassis | |
Specifications subject to change without notice |
||
|
© 2006 AMBER Electronics |